1 publication date: december 2002 sjh00073aed transistors with built-in resistor 0.60 0.05 1.00 0.05 2 1 3 0.39 +0.01 ? 0.03 0.25 0.05 0.25 0.05 0.50 0.05 0.65 0.01 0.15 0.05 2 1 0.35 0.01 0.05 0.03 0.05 0.03 3 UNRF2A6 silicon npn epitaxial planar transistor for digital circuits features ? suitable for high-density mounting and downsizing of the equip- ment for ultraminiature leadless package 0.6 mm 1.0 mm (height 0.39 mm) absolute maximum ratings t a = 25 c unit: mm internal connection marking symbol: 1y parameter symbol conditions min typ max unit collector-base voltage (emitter open) v cbo i c = 10 a, i e = 050v collector-emitter voltage (base open) v ceo i c = 2 ma, i b = 050v collector-base cutoff current (emitter open) i cbo v cb = 50 v, i e = 0 0.1 a collector-emitter cutoff current (base open) i ceo v ce = 50 v, i b = 0 0.5 a emitter-base cutoff current (collector open) i ebo v eb = 6 v, i c = 0 0.01 ma forward current transfer ratio h fe v ce = 10 v, i c = 5 ma 160 460 ? collector-emitter saturation voltage v ce(sat) i c = 10 ma, i b = 0.3 ma 0.25 v output voltage high level v oh v cc = 5 v, v b = 0.5 v, r l = 1 k ? 4.9 v output voltage low level v ol v cc = 5 v, v b = 2.5 v, r l = 1 k ? 0.2 v input resistance r 1 ? 30% 4.7 + 30% k ? transition frequency f t v cb = 10 v, i e = ? 2 ma, f = 200 mhz 150 mhz electrical characteristics t a = 25 c 3 c b r 1 (4.7 k ?) e c 1: base 2: emitter 3: collector ml3-n2 package parameter symbol rating unit collector-base voltage (emitter open) v cbo 50 v collector-emitter voltage (base open) v ceo 50 v collector current i c 80 ma total power dissipation p t 100 mw junction temperature t j 125 c storage temperature t stg ? 55 to + 125 c note) measuring methods are based on japanese industrial standard jis c 7030 measuring methods for transistors.
UNRF2A6 2 sjh00073aed h fe ? i c c ob ? v cb i o ? v in p t ? t a i c ? v ce v ce(sat) ? i c v in ? i o 0 140 60 20 80 120 40 100 0 120 100 80 60 40 20 total power dissipation p t ( mw ) ambient temperature t a ( c ) 012 10 8 26 4 0 90 80 70 60 50 30 40 20 10 t a = 25 c i b = 1.0 ma 0.7 ma 0.6 ma 0.5 ma 0.4 ma 0.3 ma 0.2 ma 0.1 ma 0. 9 ma 0. 8 ma collector-emitter voltage v ce (v) collector current i c (ma) 1 10 100 1 000 0.01 10 1 0.1 i c / i b = 10 t a = 85 c ? 25 c 25 c collector current i c (ma) collector-emitter saturation voltage v ce(sat) (v) 1 10 100 0 400 300 100 200 t a = 85 c ? 25 c 25 c v ce = 10 v collector current i c (ma) forward current transfer ratio h fe 040 10 30 20 1 10 f = 1 mhz t a = 25 c collector-base voltage v cb (v) collector output capacitance (common base, input open circuited) c ob (pf) 02.5 2.0 0.5 1.5 1.0 0.1 100 10 1 v o = 5 v t a = 25 c input voltage v in (v) output current i o (ma) 1 10 100 0.1 10 1 v o = 0.2 v t a = 25 c output current i o (ma) input voltage v in (v)
request for your special attention and precautions in using the technical information and semiconductors described in this material (1) an export permit needs to be obtained from the competent authorities of the japanese government if any of the products or technologies described in this material and controlled under the "foreign exchange and foreign trade law" is to be exported or taken out of japan. (2) the technical information described in this material is limited to showing representative characteris- tics and applied circuits examples of the products. it neither warrants non-infringement of intellec- tual property right or any other rights owned by our company or a third party, nor grants any license. (3) we are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) the products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instru- ments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (5) the products and product specifications described in this material are subject to change without notice for modification and/or improvement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (6) when designing your equipment, comply with the guaranteed values, in particular those of maxi- mum rating, the range of operating power supply voltage, and heat radiation characteristics. other- wise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) when using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) this material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. 2002 jul
|
